You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

665 lines
43 KiB

  1. [ 0.00000 Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Initializing cgroup subsys cpuacct
  4. [ 0.00000] Linux vrsion 4.4.0-190-generic (buldd@lcy01-amd64-026) (gcc version 5.4.0 20160609 (Ubunu 5.4.0-6ubuntu1~16.0.12) ) #220-Ubuntu SMP Fri Aug 28 23:02:15 UTC 2020 (Ubuntu 4.4.0-190.220-generic 4.4.233)
  5. [ 0.000000] Command line: BOOT_IMAGE=/boot/vmmlinz-4.4.0-190-generic root=LABEL=cloudimg-rootfs ro console=tty1 console=ttyS0
  6. [ 0.000000] KERNEL supported cpus:
  7. [ 0.000000] Intel GenuineIntel
  8. [ 0.000000] AMD AuthenticAMD
  9. [ 0.000000] Centaur CentaurHauls
  10. [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2] 256 [ 0.000000 x86/fp: Supporting XSAVE feature 0x01: 'x87 flating point registers'
  11. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
  12. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
  13. [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
  14. [ 0.000000] e820: BIOS-provided physical RAM map:
  15. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
  16. [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
  17. [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
  18. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
  19. [ 0.000000] BIOS-e820: [mem 0x00000003fff000-0x000000003fffffff] ACPI data
  20. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-x00000000fec00fff] reserved
  21. [ 0.000000] BIOS-e820: [m 0x00000000fee00000-0x00000000fee00fff] reserved
  22. [ 0.000000] BOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
  23. [ 0.000000] NX (Execute Disable) protection: active
  24. [ 0.000000] SMBIOS 2.5 present.
  25. [ 0.000000] Hypervisor detected: KVM
  26. [ 0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
  27. [ 0.00000] MTRR: Disabled
  28. [ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
  29. [ 0.000000] CPU MTRRs all blank - virtualized system.
  30. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
  31. [ 0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
  32. [ 0.000000] Scanning 1 areas for low memory corruption
  33. [ 0.000000] RAMDISK: [mem 0x362e0000-0x37167fff]
  34. [ 0.000000] ACPI: Early table checksum verification disabled
  35. [ 0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
  36. [ 0.000000] ACPI: XSDT 0x000000003FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
  37. [ 0.000000] ACPI: FACP 0x000000003FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
  38. [ 0.000000] ACPI: DSDT 0x000000003FFF0470 0021FF (v02 VBOX VBOXBIOS 00000002 INTL 20180105)
  39. [ 0.000000] ACPI: FACS 0x000000003FFF0200 000040
  40. [ 0.000000] ACPI: FACS 0x000000003FFF0200 000040
  41. [ 0.000000] ACPI: APIC 0x000000003FFF0240 00005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
  42. [ 0.000000] ACPI: SSDT 0x000000003FFF02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20180105)
  43. [ 0.000000] No NUMA configuration found
  44. [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003ffeffff]
  45. [ 0.000000] NODE_DATA(0) allocated [mem 0x3ffeb000-0x3ffeffff]
  46. [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
  47. [ 0.000000] kvm-clock: cpu 0, msr 0:3ffe3001, primary cpu clock
  48. [ 0.000000] kvm-clock: using sched offset of 3577766287 cycles
  49. [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
  50. [ 0.000000] Zone ranges:
  51. [ 0.000000] DMA [mem 0x00000000001000-0x0000000000ffffff]
  52. [ 0.000000] DMA32 [em 0x0000000001000000-0x000000003ffeffff]
  53. [ 0.000000] Normal empty
  54. [ 0.000000] Device empty
  55. [ 0.000000] Movable zone start for each node
  56. [ 000000] Early memory node ranges
  57. [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
  58. [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffeffff]
  59. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffeffff]
  60. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
  61. [ 0.000000]OAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  62. [ 0.000000] ACPI: INTSRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  63. [ 0.000000] ACPI: INT_SRCVR (bus 0 bus_irq 9 global_irq 9 low level)
  64. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  65. [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
  66. [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  67. [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  68. [ 0.000000] PM: Reistered nosave memor: [mem 0x000a0000-0x000effff]
  69. [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
  70. [ 0.000000] e820: [mem 0x40000000-0xfebfffff] avilable for PCIdevices
  71. [ 0.000000] Booting paavirtualized kernel on KVM
  72. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
  73. [ 0.000000] setup_percpu: R_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
  74. [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88003fc00000 s95512 r8192 d31464 u1048576
  75. [ 0.000000] Built 1 zonelists in Node order, mobilty grouping on. Total pages: 257912
  76. [ 0.000000] Policy zone: DMA32
  77. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-190-generic root=LABEL=cloudimg-rootfs ro console=tty1 console=ttyS0
  78. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  79. [ 0.000000] Memory: 997664K/1048120K available (8636K kernel code, 1337K rwdata, 4040K rodata, 1492K init, 1296K bss, 50456K reserved, 0K cma-reserved)
  80. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  81. [ 0.000000] Kernel/User page tables isolation: enabled
  82. [ 0.000000] Hierarchical RCU implementation.
  83. [ 0000000] Build-time adjustment of leaf fanout to 64.
  84. [ 0.000000] RCU restrictig CPUs from NR_CPUS=512 to nr_cpu_ids=2.
  85. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
  86. [ 0.000000] NR_IRQS:33024 nr_irqs:440 16
  87. [ 0.000000] Console: colour VGA+ 80x25
  88. [ 0.000000] console [tty1] enabled
  89. [ 0.000000] console [ttyS0] enabled
  90. [ 0.000000] tsc: Detected 2207.998 MHz processor
  91. [ 1.584822] Calibrating delay loop (skipped) preset value.. 4415.99 BogoMIPS (lpj=8831992)
  92. [ 1.631327] pid_max: default: 32768 minimum: 301
  93. [ 1.655585] ACPI: Core revision 20150930
  94. [ 1.676263] ACPI: 2 ACPI AML tables successfully acquired and loaded
  95. [ 1.753855] Security Framework initialized
  96. [ 1.808111] Yama: becoming mindful.
  97. [ 1.823958] AppArmor: AppArmor initialized
  98. [ 1.830115] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  99. [ 1.846517] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  100. [ 1.868486] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  101. [ 1.885296] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  102. [ 1.892428] Initializing cgroup subsys io
  103. [ 1.907946] Initializing cgroup subsys memory
  104. [ 1.912181] Initializing cgroup subsys devices
  105. [ 1.914280] Initializing cgroup subsys freezer
  106. [ 1.917778] Initializing cgroup subsys net_cls
  107. [ 1.920083] Initializing cgroup subsys perf_event
  108. [ 1.922279] Initializing cgroup subsys net_prio
  109. [ 1.924490] Initializing cgroup subsys hugetlb
  110. [ 1.926773] Initializing cgroup subsys pids
  111. [ 1.942378] mce: CPU supports 0 MCE banks
  112. [ 1.944188] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
  113. [ 1.946430] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
  114. [ 1.949058] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
  115. [ 1.953092] Spectre V2 : Mitigation: Full generic retpoline
  116. [ 1.955578] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
  117. [ 1.960200] Speculative Store Bypass: Vulnerable
  118. [ 1.962680] SRBDS: Unknown: Dependent on hypervisor status
  119. [ 1.965251] MDS: Mitigation: Clear CPU buffers
  120. [ 1.970315] Freeing SMP alternatives memory: 36K
  121. [ 1.979201] ftrace: allocating 32339 entries in 127 pages
  122. [ 2.088483] smpboot: APIC(0) Converting physical 0 to logical package 0
  123. [ 2.106057] smpboot: Max logical packages: 1
  124. [ 2.109399] x2apic enabled
  125. [ 2.125488] Switched APIC routing to physical x2apic.
  126. [ 2.141318] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  127. [ 2.254831] smpboot: CPU0: Intel(R) Core(TM) i3-8130U CPU @ 2.20GHz (family: 0x6, model: 0x8e, stepping: 0xa)
  128. [ 2.271753] Performance Events: unsupported p6 CPU model 142 no PMU driver, software events only.
  129. [ 2.306489] KVM setup paravirtual spinlock
  130. [ 2.330041] x86: Booting SMP configuration:
  131. [ 2.347325] .... node #0, CPUs: #1
  132. [ 2.359503] kvm-clock: cpu 1, msr 0:3ffe3041, secondary cpu clock
  133. [ 2.404300] mce: CPU supports 0 MCE banks
  134. [ 2.410177] x86: Booted up 1 node, 2 CPUs
  135. [ 2.413184] smpboot: Total of 2 processors activated (8831.99 BogoMIPS)
  136. [ 2.418835] devtmpfs: initialized
  137. [ 2.423918] evm: security.selinux
  138. [ 2.427736] evm: security.SMACK64
  139. [ 2.440920] evm: security.SMACK64EXEC
  140. [ 2.443187] evm: security.SMACK64TRANSMUTE
  141. [ 2.451368] evm: security.SMACK64MMAP
  142. [ 2.463561] evm: security.ima
  143. [ 2.491699] evm: security.capability
  144. [ 2.521294] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  145. [ 2.549809] futex hash table entries: 512 (order: 3, 32768 bytes)
  146. [ 2.563744] pinctrl core: initialized pinctrl subsystem
  147. [ 2.571711] RTC time: 22:38:13, date: 01/25/21
  148. [ 2.580323] NET: Registered protocol family 16
  149. [ 2.642487] cpuidle: using governor ladder
  150. [ 2.654477] cpuidle: using governor menu
  151. [ 2.660730] PCCT header not found.
  152. [ 2.661679] ACPI: bus type PCI registered
  153. [ 2.679166] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  154. [ 2.710268] PCI: Using configuration type 1 for base access
  155. [ 2.724923] ACPI: Added _OSI(Module Device)
  156. [ 2.734823] ACPI: Added _OSI(Processor Device)
  157. [ 2.737903] ACPI: Added _OSI(3.0 _SCP Extensions)
  158. [ 2.742608] ACPI: Added _OSI(Processor Aggregator Device)
  159. [ 2.745984] ACPI: Executed 1 blocks of module-level executable AML code
  160. [ 2.754306] ACPI: Interpreter enabled
  161. [ 2.757992] ACPI: (supports S0 S5)
  162. [ 2.761176] ACPI: Using IOAPIC for interrupt routing
  163. [ 2.765378] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  164. [ 2.799602] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  165. [ 2.808008] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
  166. [ 2.814535] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
  167. [ 2.822878] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
  168. [ 2.832705] PCI host bridge to bus 0000:00
  169. [ 2.835924] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
  170. [ 2.841196] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  171. [ 2.843137] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  172. [ 2.844936] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfdffffff window]
  173. [ 2.852070] pci_bus 0000:00: root bus resource [bus 00-ff]
  174. [ 2.860417] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
  175. [ 2.867356] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
  176. [ 2.870972] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
  177. [ 2.902386] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
  178. [ 2.945070] pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
  179. [ 2.948408] pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
  180. [ 2.973696] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
  181. [ 2.976588] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11)
  182. [ 2.982185] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
  183. [ 2.987576] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11)
  184. [ 2.992953] ACPI: Enabled 2 GPEs in block 00 to 07
  185. [ 2.995289] vgaarb: setting as boot device: PCI:0000:00:02.0
  186. [ 2.998992] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  187. [ 3.004146] vgaarb: loaded
  188. [ 3.007135] vgaarb: bridge control possible 0000:00:02.0
  189. [ 3.011388] SCSI subsystem initialized
  190. [ 3.018637] ACPI: bus type USB registered
  191. [ 3.021818] usbcore: registered new interface driver usbfs
  192. [ 3.025422] usbcore: registered new interface driver hub
  193. [ 3.029793] usbcore: registered new device driver usb
  194. [ 3.039308] PCI: Using ACPI for IRQ routing
  195. [ 3.040724] NetLabel: Initializing
  196. [ 3.041664] NetLabel: domain hash size = 128
  197. [ 3.042697] NetLabel: protocols = UNLABELED CIPSOv4
  198. [ 3.047577] NetLabel: unlabeled traffic allowed by default
  199. [ 3.049513] amd_nb: Cannot enumerate AMD northbridges
  200. [ 3.082536] clocksource: Switched to clocksource kvm-clock
  201. [ 3.103717] AppArmor: AppArmor Filesystem Enabled
  202. [ 3.104917] pnp: PnP ACPI init
  203. [ 3.106440] pnp: PnP ACPI: found 3 devices
  204. [ 3.173033] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  205. [ 3.175543] NET: Registered protocol family 2
  206. [ 3.180971] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  207. [ 3.190229] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  208. [ 3.196749] TCP: Hash tables configured (established 8192 bind 8192)
  209. [ 3.200555] UDP hash table entries: 512 (order: 2, 16384 bytes)
  210. [ 3.204791] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  211. [ 3.210203] NET: Registered protocol family 1
  212. [ 3.211324] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
  213. [ 3.212750] pci 0000:00:01.0: Activating ISA DMA hang workarounds
  214. [ 3.218025] Unpacking initramfs...
  215. [ 3.720923] Freeing initrd memory: 14880K
  216. [ 3.722708] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b6211b4, max_idle_ns: 440795230313 ns
  217. [ 3.728510] platform rtc_cmos: registered platform RTC device (no PNP device found)
  218. [ 3.732202] Scanning for low memory corruption every 60 seconds
  219. [ 3.746818] audit: initializing netlink subsys (disabled)
  220. [ 3.749003] audit: type=2000 audit(1611614297.048:1): initialized
  221. [ 3.751938] Initialise system trusted keyring
  222. [ 3.754336] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  223. [ 3.758943] zbud: loaded
  224. [ 3.760892] VFS: Disk quotas dquot_6.6.0
  225. [ 3.763098] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  226. [ 3.766533] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  227. [ 3.769469] fuse init (API version 7.23)
  228. [ 3.771387] Key type big_key registered
  229. [ 3.773320] Allocating IMA MOK and blacklist keyrings.
  230. [ 3.802211] Key type asymmetric registered
  231. [ 3.803966] Asymmetric key parser 'x509' registered
  232. [ 3.805980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  233. [ 3.809309] io scheduler noop registered
  234. [ 3.811018] io scheduler deadline registered (default)
  235. [ 3.813210] io scheduler cfq registered
  236. [ 3.815041] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  237. [ 3.817546] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  238. [ 3.820411] ACPI: AC Adapter [AC] (on-line)
  239. [ 3.822362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  240. [ 3.825505] ACPI: Power Button [PWRF]
  241. [ 3.827196] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
  242. [ 3.830473] ACPI: Sleep Button [SLPF]
  243. [ 3.837924] ACPI: Battery Slot [BAT0] (battery present)
  244. [ 3.839991] GHES: HEST is not enabled!
  245. [ 3.841729] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  246. [ 3.877948] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  247. [ 3.886569] Linux agpgart interface v0.103
  248. [ 3.895752] loop: module loaded
  249. [ 3.897981] scsi host0: ata_piix
  250. [ 3.900123] scsi host1: ata_piix
  251. [ 3.905270] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
  252. [ 3.913286] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
  253. [ 3.920230] libphy: Fixed MDIO Bus: probed
  254. [ 3.922781] tun: Universal TUN/TAP device driver, 1.6
  255. [ 3.924879] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  256. [ 3.927112] PPP generic driver version 2.4.2
  257. [ 3.929588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  258. [ 3.935229] ehci-pci: EHCI PCI platform driver
  259. [ 3.938561] ehci-platform: EHCI generic platform driver
  260. [ 3.941645] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  261. [ 3.946434] ohci-pci: OHCI PCI platform driver
  262. [ 3.949379] ohci-platform: OHCI generic platform driver
  263. [ 3.956472] uhci_hcd: USB Universal Host Controller Interface driver
  264. [ 3.959140] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  265. [ 3.967060] serio: i8042 KBD port at 0x60,0x64 irq 1
  266. [ 3.975868] serio: i8042 AUX port at 0x60,0x64 irq 12
  267. [ 3.984044] mousedev: PS/2 mouse device common for all mice
  268. [ 3.990653] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
  269. [ 3.996769] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
  270. [ 3.996830] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
  271. [ 3.996837] i2c /dev entries driver
  272. [ 3.996895] device-mapper: uevent: version 1.0.3
  273. [ 3.996951] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  274. [ 3.996967] ledtrig-cpu: registered to indicate activity on CPUs
  275. [ 3.997258] NET: Registered protocol family 10
  276. [ 3.997442] NET: Registered protocol family 17
  277. [ 3.997455] Key type dns_resolver registered
  278. [ 3.997689] registered taskstats version 1
  279. [ 3.997706] Loading compiled-in X.509 certificates
  280. [ 3.998388] Loaded X.509 cert 'Build time autogenerated kernel key: b89e9ea735e1dbde81c7786f041ecf1d53e71c2e'
  281. [ 3.998403] zswap: loaded using pool lzo/zbud
  282. [ 4.002781] Key type trusted registered
  283. [ 4.005743] Key type encrypted registered
  284. [ 4.005750] AppArmor: AppArmor sha1 policy hashing enabled
  285. [ 4.005752] ima: No TPM chip found, activating TPM-bypass!
  286. [ 4.005761] ima: Allocated hash algorithm: sha1
  287. [ 4.005773] evm: HMAC attrs: 0x1
  288. [ 4.006145] Magic number: 5:763:654
  289. [ 4.008225] rtc_cmos rtc_cmos: setting system clock to 2021-01-25 22:38:14 UTC (1611614294)
  290. [ 4.008310] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  291. [ 4.008311] EDD information not available.
  292. [ 4.117278] Freeing unused kernel memory: 1492K
  293. [ 4.132547] Write protecting the kernel read-only data: 14336k
  294. [ 4.144508] Freeing unused kernel memory: 1592K
  295. [ 4.147955] Freeing unused kernel memory: 56K
  296. Loading, please wait...
  297. starting version 229
  298. [ 4.192923] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  299. [ 4.193424] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  300. [ 4.193508] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  301. [ 4.193530] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  302. [ 4.193553] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  303. [ 4.232994] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  304. [ 4.260680] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  305. [ 4.269690] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  306. [ 4.269753] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  307. [ 4.269919] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
  308. [ 4.449033] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  309. [ 4.450585] e1000: Copyright (c) 1999-2006 Intel Corporation.
  310. [ 4.455982] Fusion MPT base driver 3.04.20
  311. [ 4.467534] Copyright (c) 1999-2008 LSI Corporation
  312. [ 4.506360] Fusion MPT SPI Host driver 3.04.20
  313. [ 4.612452] AVX2 version of gcm_enc/dec engaged.
  314. [ 4.617266] AES CTR mode by8 optimization enabled
  315. [ 4.695399] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
  316. [ 5.142304] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 02:83:3c:85:18:ff
  317. [ 5.177787] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
  318. [ 5.268666] mptbase: ioc0: Initiating bringup
  319. [ 5.339349] ioc0: LSI53C1030 A0: Capabilities={Initiator}
  320. [ 5.522282] scsi host2: ioc0: LSI53C1030 A0, FwRev=00000000h, Ports=1, MaxQ=256, IRQ=20
  321. [ 5.641602] scsi 2:0:0:0: Direct-Access VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
  322. [ 5.643392] scsi target2:0:0: Beginning Domain Validation
  323. [ 5.645891] scsi target2:0:0: Domain Validation skipping write tests
  324. [ 5.649957] scsi target2:0:0: Ending Domain Validation
  325. [ 5.653068] scsi target2:0:0: asynchronous
  326. [ 5.656817] scsi 2:0:1:0: Direct-Access VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
  327. [ 5.659560] scsi target2:0:1: Beginning Domain Validation
  328. [ 5.676217] scsi target2:0:1: Domain Validation skipping write tests
  329. [ 5.688063] scsi target2:0:1: Ending Domain Validation
  330. [ 5.698092] scsi target2:0:1: asynchronous
  331. [ 5.762012] sd 2:0:0:0: Attached scsi generic sg0 type 0
  332. [ 5.776120] sd 2:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
  333. [ 5.787037] sd 2:0:1:0: Attached scsi generic sg1 type 0
  334. [ 5.821949] sd 2:0:0:0: [sda] Write Protect is off
  335. [ 5.834208] sd 2:0:1:0: [sdb] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB)
  336. [ 5.849173] sd 2:0:0:0: [sda] Incomplete mode parameter data
  337. [ 5.869988] sd 2:0:0:0: [sda] Assuming drive cache: write through
  338. [ 5.872020] sd 2:0:1:0: [sdb] Write Protect is off
  339. [ 5.880224] sd 2:0:1:0: [sdb] Incomplete mode parameter data
  340. [ 5.897844] sd 2:0:1:0: [sdb] Assuming drive cache: write through
  341. [ 5.917396] sda: sda1
  342. [ 5.929228] sd 2:0:0:0: [sda] Attached SCSI disk
  343. [ 5.957652] sd 2:0:1:0: [sdb] Attached SCSI disk
  344. [ 6.448451] e1000 0000:00:08.0 eth1: (PCI:33MHz:32-bit) 08:00:27:4e:d5:19
  345. [ 6.459835] e1000 0000:00:08.0 eth1: Intel(R) PRO/1000 Network Connection
  346. [ 7.163610] e1000 0000:00:09.0 eth2: (PCI:33MHz:32-bit) 08:00:27:25:02:6b
  347. [ 7.171557] e1000 0000:00:09.0 eth2: Intel(R) PRO/1000 Network Connection
  348. [ 7.706828] e1000 0000:00:0a.0 eth3: (PCI:33MHz:32-bit) 08:00:27:80:81:f6
  349. [ 7.709705] e1000 0000:00:0a.0 eth3: Intel(R) PRO/1000 Network Connection
  350. [ 7.719303] e1000 0000:00:08.0 enp0s8: renamed from eth1
  351. [ 7.736823] e1000 0000:00:09.0 enp0s9: renamed from eth2
  352. [ 7.764808] e1000 0000:00:0a.0 enp0s10: renamed from eth3
  353. [ 7.804805] e1000 0000:00:03.0 enp0s3: renamed from eth0
  354. Begin: Loading essential drivers ... [ 9.168889] md: linear personality registered for level -1
  355. [ 9.173824] md: multipath personality registered for level -4
  356. [ 9.192823] md: raid0 personality registered for level 0
  357. [ 9.214455] md: raid1 personality registered for level 1
  358. [ 9.293233] raid6: sse2x1 gen() 10708 MB/s
  359. [ 9.362777] raid6: sse2x1 xor() 5662 MB/s
  360. [ 9.512586] raid6: sse2x2 gen() 8328 MB/s
  361. [ 9.588585] raid6: sse2x2 xor() 5519 MB/s
  362. [ 9.656900] raid6: sse2x4 gen() 8367 MB/s
  363. [ 9.725014] raid6: sse2x4 xor() 5385 MB/s
  364. [ 9.793901] raid6: avx2x1 gen() 8550 MB/s
  365. [ 9.863534] raid6: avx2x2 gen() 5033 MB/s
  366. [ 9.936521] raid6: avx2x4 gen() 6470 MB/s
  367. [ 9.938378] raid6: using algorithm sse2x1 gen() 10708 MB/s
  368. [ 9.940358] raid6: .... xor() 5662 MB/s, rmw enabled
  369. [ 9.942239] raid6: using avx2x2 recovery algorithm
  370. [ 9.945112] xor: automatically using best checksumming function:
  371. [ 9.985261] avx : 18756.000 MB/sec
  372. [ 9.988280] async_tx: api initialized (async)
  373. [ 10.066783] md: raid6 personality registered for level 6
  374. [ 10.069978] md: raid5 personality registered for level 5
  375. [ 10.072320] md: raid4 personality registered for level 4
  376. [ 10.105740] md: raid10 personality registered for level 10
  377. done.
  378. Begin: Running /scripts/init-premount ... done.
  379. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  380. Begin: Running /scripts/local-premount ... [ 10.152193] Btrfs loaded
  381. Scanning for Btrfs filesystems
  382. done.
  383. Warning: fsck not present, so skipping root file system
  384. [ 10.243624] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
  385. [ 10.250520] EXT4-fs (sda1): write access will be enabled during recovery
  386. [ 10.351171] EXT4-fs (sda1): orphan cleanup on readonly fs
  387. [ 10.358590] EXT4-fs (sda1): 1 orphan inode deleted
  388. [ 10.727057] EXT4-fs (sda1): recovery complete
  389. [ 10.733945] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  390. done.
  391. Begin: Running /scripts/local-bottom ... done.
  392. Begin: Running /scripts/init-bottom ... done.
  393. [ 10.944376] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  394. [ 10.982777] systemd[1]: Detected virtualization oracle.
  395. [ 10.995335] systemd[1]: Detected architecture x86-64.
  396. Welcome to Ubuntu 16.04.7 LTS!
  397. [ 11.033545] systemd[1]: Set hostname to <router11>.
  398. [ 11.213000] random: nonblocking pool is initialized
  399. [ 11.309342] systemd[1]: Listening on udev Control Socket.
  400. [ OK ] Listening on udev Control Socket.
  401. [ 11.322110] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  402. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  403. [ 11.339172] systemd[1]: Reached target Swap.
  404. [ OK ] Reached target Swap.
  405. [ 11.343197] systemd[1]: Created slice System Slice.
  406. [ OK ] Created slice System Slice.
  407. [ 11.347346] systemd[1]: Created slice system-serial\x2dgetty.slice.
  408. [ OK ] Created slice system-serial\x2dgetty.slice.
  409. [ 11.354381] systemd[1]: Listening on Syslog Socket.
  410. [ OK ] Listening on Syslog Socket.
  411. [ 11.369488] systemd[1]: Started Trigger resolvconf update for networkd DNS.
  412. [ OK ] Started Trigger resolvconf update for networkd DNS.
  413. [ 11.450586] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  414. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
  415. [ 11.471023] systemd[1]: Listening on LVM2 metadata daemon socket.
  416. [ OK ] Listening on LVM2 metadata daemon socket.
  417. [ 11.480659] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  418. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  419. [ 11.490986] systemd[1]: Reached target Encrypted Volumes.
  420. [ OK ] Reached target Encrypted Volumes.
  421. [ 11.556834] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  422. [ OK ] Listening on Device-mapper event daemon FIFOs.
  423. [ 11.594147] systemd[1]: Listening on Journal Socket (/dev/log).
  424. [ OK ] Listening on Journal Socket (/dev/log).
  425. [ 11.604795] systemd[1]: Listening on Journal Audit Socket.
  426. [ OK ] Listening on Journal Audit Socket.
  427. [ 11.652694] systemd[1]: Reached target System Time Synchronized.
  428. [ OK ] Reached target System Time Synchronized.
  429. [ 11.666228] systemd[1]: Listening on Journal Socket.
  430. [ OK ] Listening on Journal Socket.
  431. [ 11.704700] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
  432. Starting Monitoring of LVM2 mirrors... dmeventd or progress polling...
  433. [ 11.724891] systemd[1]: Mounting POSIX Message Queue File System...
  434. Mounting POSIX Message Queue File System...
  435. [ 11.750989] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  436. Starting Create list of required st... nodes for the current kernel...
  437. [ 11.765392] systemd[1]: Starting Uncomplicated firewall...
  438. Starting Uncomplicated firewall...
  439. [ 11.784347] systemd[1]: Mounting Debug File System...
  440. Mounting Debug File System...
  441. [ 11.812995] systemd[1]: Starting Remount Root and Kernel File Systems...
  442. [ 11.820113] EXT4-fs (sda1): re-mounted. Opts: (null)
  443. Starting Remount Root and Kernel File Systems...
  444. [ 11.832766] systemd[1]: Starting Nameserver information manager...
  445. Starting Nameserver information manager...
  446. [ 11.843870] systemd[1]: Starting Set console keymap...
  447. Starting Set console keymap...
  448. [ 11.861658] systemd[1]: Starting Load Kernel Modules...
  449. Starting Load Kernel Modules...
  450. [ 11.872213] systemd[1]: Mounting Huge Pages File System...
  451. Mounting Huge Pages File System...
  452. [ 11.887348] systemd[1]: Listening on udev Kernel Socket.
  453. [ OK ] Listening on udev Kernel Socket.
  454. [ 11.899399] systemd[1]: Listening on LVM2 poll daemon socket.
  455. [ OK ] Listening on LVM2 poll daemon socket.
  456. [ 11.930817] Loading iSCSI transport class v2.0-870.
  457. [ 11.940786] systemd[1]: Starting Journal Service...
  458. Starting Journal Service...
  459. [ 11.949474] systemd[1]: Reached target User and Group Name Lookups.
  460. [ OK ] Reached target User and Group Name Lookups.
  461. [ 11.963020] systemd[1]: Created slice User and Session Slice.
  462. [ OK ] Created slice User and Session Slice.
  463. [ 11.980758] systemd[1]: Reached target Slices.
  464. [ OK ] Reached target Slices.
  465. [ 11.991356] iscsi: registered transport (tcp)
  466. [ 12.013649] systemd[1]: Mounted Debug File System.
  467. [ OK ] Mounted Debug File System.
  468. [ 12.023500] systemd[1]: Mounted Huge Pages File System.
  469. [ OK ] Mounted Huge Pages File System.
  470. [ 12.039462] systemd[1]: Mounted POSIX Message Queue File System.
  471. [ OK ] Mounted POSIX Message Queue File System.
  472. [ 12.051910] systemd[1]: Started Create list of required static device nodes for the current kernel.
  473. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  474. [ 12.118597] systemd[1]: Started Uncomplicated firewall.
  475. [ OK ] Started Uncomplicated firewall.
  476. [ 12.172155] systemd[1]: Started Remount Root and Kernel File Systems.
  477. [ OK ] Started Remount Root and Kernel File Systems.
  478. [ 12.209433] systemd[1]: Started Set console keymap.
  479. [ OK ] Started Set console keymap.
  480. [ 12.231561] systemd[1]: Started Nameserver information manager.
  481. [ OK ] Started Nameserver information manager.
  482. [ 12.256937] iscsi: registered transport (iser)
  483. [ 12.257574] systemd[1]: Started Journal Service.
  484. [ OK ] Started Journal Service.
  485. [ OK ] Started Load Kernel Modules.
  486. [ OK ] Started LVM2 metadata daemon.
  487. Mounting FUSE Control File System...
  488. Starting Apply Kernel Variables...
  489. Starting udev Coldplug all Devices...
  490. Starting Flush Journal to Persistent Storage...
  491. Starting Load/Save Random Seed...
  492. Starting Create Static Device Nodes in /dev...
  493. [ OK ] Mounted FUSE Control File System.
  494. [ OK ] Started Apply Kernel Variables.
  495. [ OK ] Started Load/Save Random Seed.
  496. [ OK ] Started Monitoring of LVM2 mirrors,...ng dmeventd or progress polling.
  497. [ OK ] Started Create Static Device Nodes in /dev.
  498. Starting udev Kernel Device Manager...
  499. [ OK ] Reached target Local File Systems (Pre).
  500. [ OK ] Reached target Local File Systems.
  501. Starting Set console font and keymap...
  502. Starting Tell Plymouth To Write Out Runtime Data...
  503. Starting LSB: AppArmor initialization...
  504. Starting Initial cloud-init job (pre-networking)...
  505. [ OK ] Started udev Kernel Device Manager.
  506. [ OK ] Started udev Coldplug all Devices.
  507. [ OK ] Started Tell Plymouth To Write Out Runtime Data.
  508. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  509. [ OK ] Started Flush Journal to Persistent Storage.
  510. [ OK ] Found device /dev/ttyS0.
  511. [ OK ] Started LSB: AppArmor initialization.
  512. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  513. Starting Load AppArmor profiles managed internally by snapd...
  514. Starting Create Volatile Files and Directories...
  515. [ OK ] Started Load AppArmor profiles managed internally by snapd.
  516. [ OK ] Started Set console font and keymap.
  517. [ OK ] Started Create Volatile Files and Directories.
  518. [ OK ] Found device 82540EM Gigabit Ethern...r (PRO/1000 MT Desktop Adapter).
  519. [ OK ] Found device 82540EM Gigabit Ethern...r (PRO/1000 MT Desktop Adapter).
  520. Starting Update UTMP about System Boot/Shutdown...
  521. [ OK ] Created slice system-getty.slice.
  522. [ OK ] Started Update UTMP about System Boot/Shutdown.
  523. [ 14.303125] cloud-init[493]: Cloud-init v. 20.3-2-g371b392c-0ubuntu1~16.04.1 running 'init-local' at Mon, 25 Jan 2021 22:38:26 +0000. Up 13.29 seconds.
  524. [ OK ] Started Initial cloud-init job (pre-networking).
  525. [ OK ] Reached target Network (Pre).
  526. [ OK ] Started ifup for enp0s10.
  527. [ OK ] Started ifup for enp0s3.
  528. [ OK ] Started ifup for enp0s9.
  529. [ OK ] Started ifup for enp0s8.
  530. Starting Raise network interfaces...
  531. [ OK ] Started Raise network interfaces.
  532. [ OK ] Reached target Network.
  533. Starting Initial cloud-init job (metadata service crawler)...
  534. [ 18.862431] cloud-init[1315]: Cloud-init v. 20.3-2-g371b392c-0ubuntu1~16.04.1 running 'init' at Mon, 25 Jan 2021 22:38:30 +0000. Up 17.46 seconds.
  535. [ 18.871088] cloud-init[1315]: ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
  536. [ 19.042093] cloud-init[1315]: ci-info: +---------+------+-----------------------------+---------------+--------+-------------------+
  537. [ 19.069064] cloud-init[1315]: ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
  538. [ 19.082229] cloud-init[1315]: ci-info: +---------+------+-----------------------------+---------------+--------+-------------------+
  539. [ 19.082349] cloud-init[1315]: ci-info: | enp0s10 | True | 192.168.101.2 | 255.255.255.0 | global | 08:00:27:80:81:f6 |
  540. [ 19.082456] cloud-init[1315]: ci-info: | enp0s10 | True | fe80::a00:27ff:fe80:81f6/64 | . | link | 08:00:27:80:81:f6 |
  541. [ 19.082561] cloud-init[1315]: ci-info: | enp0s3 | True | 10.0.2.15 | 255.255.255.0 | global | 02:83:3c:85:18:ff |
  542. [ 19.082676] cloud-init[1315]: ci-info: | enp0s3 | True | fe80::83:3cff:fe85:18ff/64 | . | link | 02:83:3c:85:18:ff |
  543. [ 19.082789] cloud-init[1315]: ci-info: | enp0s8 | True | 192.168.1.254 | 255.255.255.0 | global | 08:00:27:4e:d5:19 |
  544. [ 19.082895] cloud-init[1315]: ci-info: | enp0s8 | True | fe80::a00:27ff:fe4e:d519/64 | . | link | 08:00:27:4e:d5:19 |
  545. [ 19.082998] cloud-init[1315]: ci-info: | enp0s9 | True | 192.168.100.1 | 255.255.255.0 | global | 08:00:27:25:02:6b |
  546. [ 19.083104] cloud-init[1315]: ci-info: | enp0s9 | True | fe80::a00:27ff:fe25:26b/64 | . | link | 08:00:27:25:02:6b |
  547. [ 19.083210] cloud-init[1315]: ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
  548. [ 19.083316] cloud-init[1315]: ci-info: | lo | True | ::1/128 | . | host | . |
  549. [ 19.083424] cloud-init[1315]: ci-info: +---------+------+-----------------------------+---------------+--------+-------------------+
  550. [ 19.083542] cloud-init[1315]: ci-info: ++++++++++++++++++++++++++++Route IPv4 info+++++++++++++++++++++++++++++
  551. [ 19.083662] cloud-init[1315]: ci-info: +-------+---------------+----------+---------------+-----------+-------+
  552. [ 19.083783] cloud-init[1315]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
  553. [ 19.083895] cloud-init[1315]: ci-info: +-------+---------------+----------+---------------+-----------+-------+
  554. [ 19.084031] cloud-init[1315]: ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | enp0s3 | UG |
  555. [ 19.084146] cloud-init[1315]: ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | enp0s3 | U |
  556. [ 19.084314] cloud-init[1315]: ci-info: | 2 | 192.168.1.0 | 0.0.0.0 | 255.255.255.0 | enp0s8 | U |
  557. [ 19.084433] cloud-init[1315]: ci-info: | 3 | 192.168.100.0 | 0.0.0.0 | 255.255.255.0 | enp0s9 | U |
  558. [ 19.084554] cloud-init[1315]: ci-info: | 4 | 192.168.101.0 | 0.0.0.0 | 255.255.255.0 | enp0s10 | U |
  559. [ 19.084671] cloud-init[1315]: ci-info: +-------+---------------+----------+---------------+-----------+-------+
  560. [ 19.084791] cloud-init[1315]: ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
  561. [ 19.084910] cloud-init[1315]: ci-info: +-------+-------------+---------+-----------+-------+
  562. [ 19.085026] cloud-init[1315]: ci-info: | Route | Destination | Gateway | Interface | Flags |
  563. [ 19.085133] cloud-init[1315]: ci-info: +-------+-------------+---------+-----------+-------+
  564. [ 19.085236] cloud-init[1315]: ci-info: | 0 | fe80::/64 | :: | enp0s10 | U |
  565. [ 19.085345] cloud-init[1315]: ci-info: | 1 | fe80::/64 | :: | enp0s9 | U |
  566. [ 19.085459] cloud-init[1315]: ci-info: | 2 | fe80::/64 | :: | enp0s8 | U |
  567. [ 19.085571] cloud-init[1315]: ci-info: | 3 | fe80::/64 | :: | enp0s3 | U |
  568. [ 19.085685] cloud-init[1315]: ci-info: | 10 | ff00::/8 | :: | enp0s10 | U |
  569. [ 19.085807] cloud-init[1315]: ci-info: | 11 | ff00::/8 | :: | enp0s9 | U |
  570. [ 19.085930] cloud-init[1315]: ci-info: | 12 | ff00::/8 | :: | enp0s8 | U |
  571. [ 19.086061] cloud-init[1315]: ci-info: | 13 | ff00::/8 | :: | enp0s3 | U |
  572. [ 19.086188] cloud-init[1315]: ci-info: +-------+-------------+---------+-----------+-------+
  573. [ OK ] Started Initial cloud-init job (metadata service crawler).
  574. [ OK ] Reached target Network is Online.
  575. Starting iSCSI initiator daemon (iscsid)...
  576. [ OK ] Reached target Cloud-config availability.
  577. [ OK ] Reached target System Initialization.
  578. Starting LXD - unix socket.
  579. Starting Socket activation for snappy daemon.
  580. [ OK ] Started Message of the Day.
  581. [ OK ] Listening on D-Bus System Message Bus Socket.
  582. [ OK ] Listening on UUID daemon activation socket.
  583. [ OK ] Started ACPI Events Check.
  584. [ OK ] Reached target Paths.
  585. [ OK ] Started Daily Cleanup of Temporary Directories.
  586. [ OK ] Listening on ACPID Listen Socket.
  587. [ OK ] Started Daily apt download activities.
  588. [ OK ] Started Daily apt upgrade and clean activities.
  589. [ OK ] Reached target Timers.
  590. [ OK ] Listening on LXD - unix socket.
  591. [ OK ] Listening on Socket activation for snappy daemon.
  592. [ OK ] Started iSCSI initiator daemon (iscsid).
  593. Starting Login to default iSCSI targets...
  594. [ OK ] Reached target Sockets.
  595. [ OK ] Reached target Basic System.
  596. [ OK ] Started FUSE filesystem for LXC.
  597. [ OK ] Started ACPI event daemon.
  598. Starting LSB: Record successful boot for GRUB...
  599. Starting Login Service...
  600. Starting LSB: MD monitoring daemon...
  601. [ OK ] Started Regular background program processing daemon.
  602. Starting Snap Daemon...
  603. Starting System Logging Service...
  604. Starting Virtualbox guest utils...
  605. Starting Accounts Service...
  606. Starting OpenBSD Secure Shell server...
  607. [ OK ] Started Deferred execution scheduler.
  608. [ OK ] Started D-Bus System Message Bus.
  609. Starting /etc/rc.local Compatibility...
  610. Starting LXD - container startup/shutdown...
  611. [ OK ] Started System Logging Service.
  612. [ OK ] Started /etc/rc.local Compatibility.
  613. [ OK ] Started Login Service.
  614. [ OK ] Started OpenBSD Secure Shell server.
  615. [ OK ] Started LSB: Record successful boot for GRUB.
  616. [ OK ] Started LSB: MD monitoring daemon.
  617. [ OK ] Started Virtualbox guest utils.
  618. [ OK ] Started Login to default iSCSI targets.
  619. [ OK ] Reached target Remote File Systems (Pre).
  620. [ OK ] Reached target Remote File Systems.
  621. Starting LSB: daemon to balance interrupts for SMP systems...
  622. Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
  623. Starting Permit User Sessions...
  624. Starting LSB: start and stop the Quagga routing suite...
  625. Starting LSB: automatic crash report generation...
  626. [ OK ] Started Unattended Upgrades Shutdown.
  627. Starting Authenticate and Authorize Users to Run Privileged Tasks...
  628. [ OK ] Started Snap Daemon.
  629. [ OK ] Started LXD - container startup/shutdown.
  630. [ OK ] Started Permit User Sessions.
  631. [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
  632. [ OK ] Started Accounts Service.
  633. Starting Hold until boot process finishes up...
  634. Starting Terminate Plymouth Boot Screen...
  635. Starting Wait until snapd is fully seeded...
  636. [ OK ] Started LSB: daemon to balance interrupts for SMP systems.
  637. [ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
  638. [ OK ] Started LSB: start and stop the Quagga routing suite.
  639. [ OK ] Started LSB: automatic crash report generation.
  640. [ OK ] Started Hold until boot process finishes up.
  641. [ OK ] Started Terminate Plymouth Boot Screen.
  642. [ OK ] Started Wait until snapd is fully seeded.
  643. Starting Apply the settings specified in cloud-config...
  644. [ OK ] Started Serial Getty on ttyS0.
  645. [ OK ] Started Getty on tty1.
  646. [ OK ] Reached target Login Prompts.
  647. Starting Set console scheme...
  648. [ OK ] Reached target Multi-User System.
  649. [ OK ] Reached target Graphical Interface.
  650. Starting Update UTMP about System Runlevel Changes...
  651. [ OK ] Started Set console scheme.
  652. [ OK ] Started Update UTMP about System Runlevel Changes.
  653. [ 25.889438] cloud-init[1596]: Cloud-init v. 20.3-2-g371b392c-0ubuntu1~16.04.1 running 'modules:config' at Mon, 25 Jan 2021 22:38:38 +0000. Up 25.47 seconds.
  654. [ OK ] Started Apply the settings specified in cloud-config.
  655. Starting Execute cloud user/final scripts...
  656. [ 27.489163] cloud-init[1616]: Cloud-init v. 20.3-2-g371b392c-0ubuntu1~16.04.1 running 'modules:final' at Mon, 25 Jan 2021 22:38:40 +0000. Up 27.23 seconds.
  657. [ 27.622203] cloud-init[1616]: Cloud-init v. 20.3-2-g371b392c-0ubuntu1~16.04.1 finished at Mon, 25 Jan 2021 22:38:40 +0000. Datasource DataSourceNoCloud [seed=/dev/sdb][dsmode=net]. Up 27.46 seconds
  658. [ OK ] Started Execute cloud user/final scripts.
  659. [ OK ] Reached target Cloud-init target.
  660. Ubuntu 16.04.7 LTS router11 ttyS0
  661. router11 login: